How to Create a Schedule for Construction Noise Hours

There’s a reason why over 11.4 million Americans are employed in the construction industry. This job market not only supports millions of workers, but it’s also responsible for building and maintaining vital infrastructure, homes, and offices.

There’s only one main downside to construction: the noise it makes. Loud work volumes can disrupt the community around your worksite. This, in turn, can disrupt the flow of your construction work.

So, what’s the solution to this age-old problem? The key is to make a tight schedule around your construction noise hours. If you want to know how then you’re in the right place.

In this article, we’ll go into detail about the ways to make this schedule. That way, you can complete your project with minimal disruption to the community.

Know Your Construction Noise Hours and Stick to Them

To make a schedule you first need to know the hours that you’re allowed to make maximum noise. These laws can be different from state to state, so it’s important to check the local laws and ordinances we're working on.

construction noise hours

However, most places allow for maximum noise from 7:00 am to 7:00 pm on weekdays and 9:00 am to 8:00 pm on weekends and holidays.

Once you find out the workable times in your area, it’s important to stick to them. Ideally, you can allocate time for noisy work only during the middle hours of the day.

Do Your Site Preparation Ahead of Time

Site preparation can be noisy work. As such, it’s important to avoid doing so in the early morning. Instead, move any materials you need in the early evening, or during the workday.

During this prep time, it’s also important to take readings on the noise level of your heavy equipment. Construction is only allowed to operate at a certain decibel level during noise hours.

While this depends on the time, day, and project, it generally falls between sixty and eighty-five decibels. Make sure to take these readings at the nearest property line to find out if you’re in potential violation.

Avoid Mistakes By Properly Surveying

If your construction involves digging of any kind, then it’s important to properly survey the ground before proceeding. Without this precaution, there’s a chance you could hit utility lines, or make a mistake with the drilling.

This not only disrupts your schedule, but it also requires more loud work to correct. If you’re serious about avoiding mistakes during your survey, then you should invest in a DigiTrak F2 Falcon Receiver Locator with Transmitter.

This device allows any drill operator optimal precision and accuracy when working. This, in turn, assures that you don’t make any potentially costly mistakes. If you want to learn more about this product, then make sure to browse here.

Schedule Noiser Work Later In the Day

If you know that you’ll need to complete extra noisy work during the day, then try to make sure to schedule it accordingly. This means planning it later in the day. No one likes being woken up by loud, heavy equipment sounds.

As such, doing it early in the day is a recipe for a noise complaint. In addition to this, you should make sure that you’re taking short breaks in between the loud noise.

Alternatively, you can try taking a long break in the middle of the day. This space in between the noise helps make sure it’s not bothering people for too long a period.

Monitor Truck Movements and Concrete Pours

Construction sites in the morning are usually a hive of activity as trucks begin to make their way into the site. Unfortunately, these loud vehicles can sometimes wake people up, especially if it's early in the morning.

You can avoid this by coordinating deliveries to occur during normal work hours instead of before or after them. If you notice that truck drivers come early in the morning anyway, then tell them to turn off their engines while they wait for normal hours of operation to begin.

Pay Attention to Your Worker’s Behavior

Sometimes construction workers can be loud. Lively conversations early in the morning might be enough to wake people up if you’re close to apartment buildings or homes.

As such, you should tell workers to keep conversation to a minimum during these early hours. At the very least, they should keep their voices down. You should also actively discourage any form of catcalling or similar verbal harassment. This is an easy way to get a noise complaint if it upsets someone enough.

Notify Neighbors If You Anticipate

Your neighbors will likely be more willing to put up with noise if they know it’s coming. As such, if you know you’ll be working loud all day, then communicate this to people in the area.

Give them a timeframe so they know when they can expect it to begin and end. You should also provide them with the phone number of the foreman if they need to contact someone.

Soundproof Worksites

If all else fails, then you can try soundproofing parts of the construction site that require loud noise equipment. There are a variety of sound barriers and mufflers that can mitigate some of the loud noise.

Alternatively, you can try lowering the power settings on your noisy equipment. In addition to this, work for shorter periods. This won’t work for every circumstance, but it might be a viable solution for some people.

Want More Content? Keep Exploring

We hope this article helped you learn how to create a schedule around construction noise hours. As you can see, making a schedule will involve some effort and coordination.

However, as long as you effectively communicate with your staff and contractors, then you should be able to avoid any potential complaints.

Did you enjoy this article? If the answer is yes, then you’re in the right place. Keep reading to find more content that you’re sure to love.

Post a Comment